Buy Sell & Rent

Your Top Guide to Installation and Operation of Pool Pumps Australia | April 26, 2013

pool pumps AustraliaIf you want to save energy and still maintain a comfortable swimming pool, you can do so by making use of a smaller and energy efficient pool pumps Australia. The good thing about smaller pool pumps is that their operation needs are less compared to larger pumps. The larger the size of your pump, the higher the cost maintenance and pumping will be.

When it comes to choice of pool pumps Australia, experts are better placed to help you make the right choice. Making use of a supplier’s design chart would also be very helpful. The chart will help you to match hydraulic characteristics of your prospective pool pump and the flow characteristic of the pool. If yours makes use of solar pool heating, you have to look at how the pool water will be pumped through collectors.

It is a generally accepted fact that smaller pumps are sufficient for residential pools. These pool pumps Australia can be used if the hydraulic resistance of the pool circulation is reduced. This can be accomplished in two ways. The first option is to substitute larger filters. Secondly, the diameter of the pipes could be increased or the length decreased. Once you manage to decrease the hydraulic resistance of the pool circulation system, the pump’s electricity use will be reduced by up to 40%.

When it comes to operation of pool pumps Australia, in most cases, they are left to run longer than would be necessary. Circulating the water in your pool ensures that chemicals are properly mixed and debris are removed. It is important to note that chemicals will remain mixed as long as water circulates. It is not however important to circulate the water every day in order to do away with the debris; after all, lots of debris can be removed by making use of a vacuum or skimmer. In any case, longer circulation will not impede the growth of algae. It is better to make use of chemicals and scrub the walls.

Reduce filtration time to six hours per day. In some instances the water may not appear clear and what you need to do is make half-hour increments until the water becomes clear. There are people who reduce pumping to not more than three hours per day and the quality of the water still remains good. This goes a long way in saving electricity bills and you may end up saving up to 60%.

The other option worth consideration is to install a timer to control pool pump cycling. If you have a problem with debris in your pool, make use of a timer that activates the pump for several short periods. These several short cycles help keep the pool clean all day. Most essential is to keep clear the intake grates. When drains are clogged, pool pumps Australia are forced to work harder and this requires more energy. You therefore need to wash your filters appropriately. Do not backwash very frequently as this will end up wasting water.


Leave a Comment »

Leave a comment